Table Top Tent light supplier shares that there are some film friends because the rent of the studio is expensive, as soon as the studio kept pressing the shutter, for fear of not enough. In fact, most of photography is not to press the shutter, but to observe and improve the light, when the light is good, to capture the beautiful moment. In order to let you better use the studio, take satisfactory photos, especially introduce the studio, lighting and other related things, and detailed illustration of the characteristics of lighting.
In order to completely control the light, the most basic element of the studio is to have a black blocking cloth, completely cut off the outside light, and then put a movable lifting light inside, which is the simplest studio.
Compared with the standard film studio, 3 ~ 5 lamps are usually configured to enrich the effect of light, but beginners should not think that the more lights, the better, because the more lights, the more difficult to control.
The Table Top Tent light divides the continuous light lamp and the flash lamp two kinds, the continuous light lamp is very easy to use, shoots under the sun is the same, saw the effect was to come out, the metering also may use the machine in the metering to judge. But the color temperature of quartz lamp is low (2800 ~ 3200), and the color temperature is not stable, the voltage change will cause a wide range of color temperature change, and the heat is large, unsafe, light amount is small, so the modern studio is rarely used (now the color temperature close to the sun lamp performance is more and more stable, but the brightness is not high enough -- note). The most used flash is the high-power flash as shown in the figure below, ranging from 100W to 5000W. Standard studios are equipped with a total amount of flash of 2500W (3 to 5), which can complete most commercial photography projects. The most used flash is the high-power flash as shown in the figure below, ranging from 100W to 5000W. Standard studios are equipped with a total amount of flash of 2500W (3 to 5), which can complete most commercial photography projects.
Professional flash color temperature is very stable, the use of Marine tube light can work in the long-term stability of 5500K or so, with daylight film will be able to perfect the reproduction of the color of the photographed, and the amount of light, can choose a minimal aperture, conducive to the commercial photography needs of the large depth of field.
This image is a standard image of the appearance of the studio flash. The round glass object in the center is the flash bulb, and the white strip is the 150W shape lamp (double tungsten wire inside), which is used to simulate the flash effect and focus. Some flash lamps are made of 60W tungsten filament. They are not suitable for focusing under a small 4x5 aperture. This double bulb is the most vulnerable part of the flash. High temperature and voltage when open, do not touch by hand, after closing the natural cooling for a period of time before safe replacement.